在燃?xì)獍l(fā)電機組推廣清潔燃料的過程中，也出現了一些與潤滑油相關的問題，引起了用戶的關注。比如改裝后的車輛燃?xì)獍l(fā)電機組仍然使用原廠機油，往往會導致積碳多、油泥大、換油周期縮短、發動機容易早期磨損、大修里程縮短等諸多問題。下面我們對這些現象和對策做一些簡單的分析和介紹。
In the process of promoting clean fuels in gas generator sets, there have also been some issues related to lubricating oil, which have attracted the attention of users. For example, the modified vehicle gas generator set still uses the original engine oil, which often leads to many problems such as excessive carbon deposition, large oil sludge, shortened oil change intervals, early engine wear, and shortened overhaul mileage. Below, we will provide a brief analysis and introduction of these phenomena and countermeasures.
燃?xì)獍l(fā)電機組與汽油、柴油不同，燃油純度高、熱效率高、燃?xì)鉁囟雀摺⑷紵鍧?，但潤滑性差，且含有一定量的硫，容易造成發動機相關零部件的粘附、摩擦、腐蝕和生銹。其缺點總結和分析如下
Unlike gasoline and diesel, gas generator sets have high fuel purity, high thermal efficiency, high gas temperature, and clean combustion, but poor lubricity and contain a certain amount of sulfur, which can easily cause adhesion, friction, corrosion, and rust of engine related components. The summary and analysis of its shortcomings are as follows
1、容易產生高溫積碳。
1. Easy to generate high-temperature carbon deposition.
燃?xì)獍l(fā)電機組燃燒完全，燃燒室溫度比汽油/柴油發動機高幾十到幾百度。高溫氧化會導致油品質量和粘度下降太多，導致潤滑性能失效。氣缸溫度高時，潤滑油容易產生積碳，導致過早燃燒。火花塞積碳會導致發動機異常磨損或故障，還可能增加氮氧化物排放。
The gas generator set burns completely, and the combustion chamber temperature is tens to hundreds of degrees higher than that of gasoline/diesel engines. High temperature oxidation can lead to a significant decrease in oil quality and viscosity, leading to lubrication performance failure. When the cylinder temperature is high, lubricating oil is prone to carbon deposition, leading to premature combustion. Carbon accumulation in spark plugs can cause abnormal engine wear or malfunction, and may also increase nitrogen oxide emissions.

2.閥門部件容易磨損。
2. Valve components are prone to wear and tear.
燃?xì)獍l(fā)電機組中的汽油/柴油以霧滴的形式噴入氣缸，可以對氣門、氣門座等部件進行潤滑和冷卻，而LNG以氣態進入氣缸，不具備液體潤滑的功能，容易使氣門、氣門座等部件在沒有潤滑的情況下變干，容易產生粘著磨損。普通機油的高灰添加劑在高溫作用下，容易在發動機零部件表面形成硬質沉積物，造成發動機異常磨損、火花塞堵塞、氣門積碳，引起發動機爆震、點火延遲或氣門著火。結果，發動機功率降低，功率不穩定，甚至縮短了發動機的使用壽命。
The gasoline/diesel in the gas generator set is sprayed into the cylinder in the form of droplets, which can lubricate and cool components such as valves and valve seats. However, LNG enters the cylinder in a gaseous state and does not have the function of liquid lubrication, which can easily dry components such as valves and valve seats without lubrication and cause adhesive wear. The high ash additive of ordinary engine oil can easily form hard deposits on the surface of engine components under high temperature, causing abnormal engine wear, spark plug blockage, valve carbon accumulation, and causing engine detonation, ignition delay, or valve ignition. As a result, the engine power decreases, the power is unstable, and even the service life of the engine is shortened.
3.很容易形成有害物質。
3. It is easy to form harmful substances.
燃?xì)獍l(fā)電機組使用普通機油，廢氣中過量的氮氧化物無法解決，加速油泥的產生，可能造成油路堵塞或漆膜等有害物質的產生。特別是裝有EGR裝置的發動機，容易造成油品質量下降、濾清器堵塞、粘度、酸堿數失控等趨勢。
The use of ordinary engine oil in gas generator sets cannot solve the problem of excessive nitrogen oxides in the exhaust gas, which accelerates the production of oil sludge and may cause oil blockage or the production of harmful substances such as paint films. Especially for engines equipped with EGR devices, it is easy to cause trends such as decreased oil quality, clogged filters, viscosity, and uncontrolled acid-base numbers.