1: Grounding wire 2: connected to neutral wire 1 and

2相當于我們的插頭的兩個腳，直接接電源的

2 is equivalent to the two pins of our plug, which are directly connected to the power supply

3：點火開關，一般外接一個開關，一按開關就點火（因為閉合通電了，點火控制器內部控制高壓包輸出的高壓電點火）屬于點動點火，不能持續性點火，否者容易燒壞。

3: The ignition switch is usually externally connected with a switch. It will ignite as soon as the switch is pressed (because it is closed and powered on, the ignition controller controls the high-voltage electric ignition output by the high-voltage package). It belongs to inching ignition and cannot ignite continuously. Otherwise, it is easy to burn out.

4：復位開關，一般外接一個開關，一打開關就復位，不屬于點動，可持續。

4: The reset switch is generally connected with an external switch, which will reset as soon as the switch is turned on. It is not inching and sustainable.

5：接火焰檢測線，雙電極檢測中，此外處檢測電極，uv檢測中，此處接uv的1號線。

5: Connected to flame detection line, in double electrode detection, in addition to detection electrode, in UV detection, connected to UV line 1 here.

6：雙電極檢測中，此處不接，UV檢測中，此處接UV的2號線。

6: In double electrode detection, it is not connected here. In UV detection, it is connected to UV line 2.

7：接燒嘴上的地線。

7: Connect the ground wire on the burner.

8和9是故障報警輸出，此處接個報警器的話，檢測不到火焰的話就會令報警器報警。

8 and 9 are fault alarm outputs. If an alarm is connected here, it will alarm if no flame is detected.

11：接電磁閥火線。12：不接。13和14正常信號輸出，此處接個顯示燈的話，正常燃燒的話就會令燈亮。

11: Connect the live wire of solenoid valve. 12: No. 13 and 14 normal signal output. If a display lamp is connected here, the lamp will be on if it burns normally.

本文的內容是由點火控制器給您提供，我們專注客戶需求，不斷的發展，為客戶提供更多的服務，詳情可參考我們的網站：http://087801.com

The content of this article is provided to you by the ignition controller. We focus on customer needs, continue to develop and provide customers with more services. For details, please refer to our website: http://087801.com